TM 9--2350--292--20--2
0667 00--8
DEEP WATER FORDING KIT -- CONTINUED
0667 00
Installation--Continued
FIRE EXTINGUISHER NOZZLES
WARNING
Do not apply adhesive sealant to fire extinguisher nozzle
caps. Caps are designed to blow off if fire extinguisher
system is discharged. Sealing the nozzle caps could re-
sult in injury or death to personnel from malfunctioning of
the fire extinguishing system.
1. Open engine deck exhaust grille doors and engine deck side grille doors (TM 9--2350--292--10) to gain access to
fire extinguisher nozzles in engine compartment and remove engine compartment drain valve (WP 0452 00).
2. Remove subfloor plates #10, #11, #15 and #22 (WP 0454 00) to gain access to fire extinguisher nozzles under
the subfloor.
3. Install rubber caps (1) in each of five fire extinguisher nozzles (2) in engine compartment and three fire extinguish-
er nozzles (2) under subfloor.
4. Install subfloor plates #10, #11, #15 and #22 (WP 0454 00).
Figure 360
Figure 360
1
2