TM 9--2350--292--20--2
0499 00--3
MAIN WINCH WIRE ROPE ASSEMBLY REPLACEMENT -- CONTINUED
0499 00
Installation
1. Lay wire rope (7) out its entire length.
2. Insert tapered -- end of wire rope (7) through trumpet (8) of vehicle.
3. Insert wire rope (7) over roller assembly (9) and through wire rope hole in drum (1). Allow wire rope (7) to pro-
trude approximately 7.0 -- 7.5 inches (177.8 -- 190.5 mm) from opposite end of drum (1).
Figure 261
1
7
8
9
