TM 9--2350--292--20--2
0545 00--2
MAIN HYDRAULIC PUMPS ASSEMBLY AND POWER TAKEOFF (PTO)
CLUTCH REPLACEMENT -- CONTINUED
0545 00
NOTE
When replacing PTO clutch assembly, Removal step 6
and Installation step 3 are not required.
Removal
1. Through commanders cupola plate opening, position lifting slings to cradle main hydraulic pumps assembly and
PTO clutch (1), attach lifting slings to lifting device. Raise lifting device to remove slack from lifting slings.
NOTE
Note the quantity and position of shim(s) being removed
to ensure shim(s) are installed in the same position.
2. Remove eight screws (2), eight lockwashers (3), two flat washers (4) and shims (5) from hydraulic pumps as-
sembly mount (6), PTO clutch assembly (7) and support plate (8). Discard lockwashers.
Figure 292
FORWARD
1
2
2
3
3
7
8
6
5
4
5