CHAPTER 9: MAINTENANCE OF HULL AND CAB-RELATED COMPONENTS
TM 9-2350-256-20
9-78
REPLACE/REPAIR/SERVICE ACCELERATOR CONTROLS AND LINKAGES-
Continued
10
Remove screw (24) and lockwasher (25) from lever (26).
11
Remove from each bearing unit (27 and 28) two screws (29), two lockwashers (30), and two flat washers (31).
12
Remove two screws (32) and two lockwashers (33) from levers (34 and 26) and two keys (35) from shaft (36).
13
Remove bearing units (27 and 28) from shaft (36).
14
Remove screw (37) and lockwasher (38) from clevis (39).
15
Remove clevis (39) and nut (40) from rod (41).
16
Remove screw (42), lockwasher (43), lever (44), spring (45), flat washer (46), and rod (41). Remove bearing
(47) and nut (48) from one end of rod.
9-174
