SECTION V: CONTROLS AND LINKAGES
TM 9-2350-256-20
8
Install key (77), lever (76), new lockwasher (75), and screw (74).
9
Install new lockwasher (73) and screw (72).
10
Install key (71), lever (70), new lockwasher (69), and screw (68).
11
Install nut (67) and bearing (66) to rod (65).
12
Install rod (65) with new lockwasher (64) and screw (63).
NOTE
Linkages must be completely installed and alined and rubber boot must be adjusted
(see paragraph 9-79) before cementing rubber boot in place.
13
Install rubber bushing (62), rubber boot (58), clamp (61), nut (60), and bearing (59).
14
Install nut (55) and bearing (54) to one end of tube (53) and nut (57) and clevis (56) to other end of tube.
15
Install tube (53), new lockwasher (52), and screw (51).
16
Install six rollers (50) with six bolts (49).
9-179
