SECTION V: TROUBLESHOOTING
TM 9-2350-256-20
WARNING
Remove all jewelry such as rings, dog tags,
bracelets, etc. If jewelry contacts a metal
surface a direct short may result in instant
heating of tools, damage to equipment, and
injury or death to personnel.
D
Place red lead of multimeter in socket A of wire 38/59
and black lead to ground. Turn MASTER switch on
and check for voltage. Turn MASTER switch OFF. If
voltage is present, go to step E. If voltage is not
present, go to step G.
E
Reconnect electrical accessories panel wiring harness
to electrical accessories panel. Remove four screws
(1) and four lockwashers (2) and release electrical
accessories panel (3). Disconnect wire 38/518 from
winch light switch side of 15 A circuit breaker. Place
red lead of multimeter on terminal of 15 A circuit
breaker and black lead to ground. Turn MASTER
switch on and check for voltage. Turn MASTER
switch OFF. If voltage is present, repair/replace wire
38/518 of bilge pump main power wiring harness from
15 A circuit breaker to electrical accessories panel
wiring harness (see paragraph 6-84). If voltage is not
present, go to step F.
2-259
