Google+
Facebook
LinkedIn
Twitter
Digg
StumbleUpon
Home
Download PDF
Order CD-ROM
Order in Print
Installation - TM-9-2350-292-20-2_1061
Removal - TM-9-2350-292-20-2_1063
TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
TM 9--2350--292--20--2
0635 00--1
AUXILIARY
POWER UNIT
GENERATOR REPLACEMENT (HATZ)
0635 00
THIS WORK PACKAGE COVERS:
Removal, Inspection, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Materials/Parts
Adhesive (item 81, WP 0716 00)
Lockwashers
(3) (item 38, WP 0718 00)
Self--locking nuts (6) (item 120, WP 0718 00)
Marker tags (item 49, WP 0716 00)
Cotter pin (item 119, WP 0718 00)
Materials/Parts (Continued)
Self--locking nuts (2) (item 282, WP 0718 00)
Self--locking nuts (2) (item 461, WP 0718 00)
(Not required if installing new generator)
Equipment Conditions
APU hydraulic pump removed (WP 0548 00)
Personnel Required
Two
Removal
NOTE
Tag all electrical components and electrical leads prior to
removal to aid in installation.
Remove adhesive from applicable electrical wire terminal
connections.
1. Loosen nut (1) on strap assembly (2) and lift end of strap assembly (2) out of notch on engine support (3).
2. Remove cotter pin (4), headed pin (5) and strap assembly (2) from underside of engine support (3). Discard cotter
pin.
3. Remove
generator
adapter (6) from generator (7).
7
2
4
5
6
1
3
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business