APPENDIX I: DEEP WATER FORDING KIT
TM 9-2350-256-20
I-8 ENGINE AIR INLET PIPES
1
Bond kit-furnished rubber strip (1) to left and right kit-furnished air inlet pipes (2) with adhesive sealant
(Table I-1, item 4).
2
Remove four existing screws (3) and four lockwashers (4) securing armor covers (5). Do not remove either
armor cover.
3
Install left and right kit-furnished air inlet pipes (2) and secure each with four previously removed screws
(3) and four new lockwashers (4). Apply adhesive sealant (Table I-1, item 4) around heads of screws and
base of air inlet pipes at installation.
4
Install four kit-furnished screws (6) and four new lockwashers (7) in both left and right air inlet pipes (2).
I-8
